High Torque, Huck & Porta Power

Video Torque Wrench Pumps

Click This Photo for video

High Torque Pumps

Click to Print This Page

TJ Tools have been supplying these High Torque Wrench Pumps for over 20 Years. These units dominate in the field for Performance, Reliability and value for money. If your looking for a Torque Wrench pump with spare parts Australia wide, you cant go past the PE-55 series.

The PE-55 torque wrench pumps are used all over the world and have become a very successful partner for running Hydraulic torque wrenches. These pumps will operate any brand torque tool from 100 to 50,000 Ft lbs.

PDF Torque Wrench Pumps catalogue


HIGH TORQUE WRENCH PUMPS -240 Volt - 10,000 psi

2 port - Proven - Reliable - High flow. These Torque Wrench Pumps are specifically set up to run Hydraulic Torque Wrenches. The pumps are a double acting system. The Advance port is pressure adjustable between 1,500 to 10,000 psi . This is required to set and control the hydraulic wrench torque output. The retract port pressure is controlled at 1,400 psi to retract the tool piston.

The valve system is set up to direct pressure to the advance port when position 3 is used on the remote control. When position 3 is released the valve automatically switches to retract pressure to return the wrench piston. Most torque wrench manufacturers re-brand these pumps. TJ Tools can offer you the same pump direct. TJ Tools are the authorized Powerteam  Repair & Supply agents.

Torque wrench Pumps come in 240 Volt or Air Driven. High Torque Power packs come standard with 4" Pressure Gauge, Regulator, 10L sump, 3m Remote Control, Test tagged, Couplers & Oil, Sight Level Glass, Temp Gauge Ready to go.  We highly recommend this high force pump. see video

Pumps

HIGH TORQUE WRENCH PUMPS -AIR DRIVEN  - 10,000 psi

Proven - Reliable - High flow These Wrench Pumps dominate in the field. The Air driven Pumps are becoming increasingly popular in solving electrical issues in the field. They are specifically set up to run Hydraulic Torque Wrenches. These units come with a Pressure Regulators to adjust between 1,500 to 10,000 psi . This is how the torque is set. The retract pressure is controlled at 1,400 psi to return the tool piston.  Most torque wrench manufacturers re-brand these pumps. TJ Tools can offer you the same pump direct. TJ Tools are the authorized Powerteam  Repair & Supply agents. 

Torque wrench Pumps come in 240 Volt or Air Driven. High Torque Power packs come standard with 4" Pressure Gauge, Regulator, 10L sump, 3m Remote Control, Test tagged, Couplers & Oil, Sight Level Glass, Temp Gauge Ready to go.

We highly recommend this high force pump, particularly for heads 1" Drive and up. See Video Air Pump

HOSE SETS - WRENCHES, HIGH-TORQUES

4:1 Hose Sets For High Torques: These hose sets are specifically set up for High Torque tool units. The Hose is a 1/4" diameter Steel braid, twin line, double acting hose. It is set up for advance & retract. It comes complete with fittings Male & Female screw couplers & Hydraulic Test Tag. 

We recommend this hose for high torque tools. The hose sets have a 4:1 rating ( 10,000 operating with a 40,000psi burst ) suiting double acting systems. It is Yellow for high viability and is marked as a "High Torque Hose" to avoid and confusion. We already supply this hose to many large Mining companies and heavy industry.

Read More / See more

Go to Top of This Page